Double cord housing / 2 Ikelite flash
Double TTL synchronisation cable to connect an Ikelite housing to 2 Ikelite flash units.
Ikelite Twisted Sync Cable
For connecting an Ikelite housing to two Ikelite flashes. TTL compatible for data transmission.
Included:
- 1 protection cap for Ikelite/Ikelite pin (IKE 0301)
- 1 protection cap for single pin (IKE 0301.12)
- 1 dose of Ikelite silicone grease 1cc
Additional Information:
The blue ring on one end of the cable indicates TTL mode compatibility.
The side marked with the red ring is for connecting the second flash (slave flash).
Do not connect this cable to a flash that is not TTL compatible.
After use, disconnect the cable from the flashes, apply a thin layer of grease to the seal, and replace the protection cap to prevent pin sticking.
This model replaces reference 4103.52 since January 2019.
No customer reviews for the moment.
