Single sync cord for housing and Ikelite flash unit
Simple TTL sync cable for connecting an Ikelite housing to an Ikelite flash unit.
Ikelite Twisted Sync Cable
For connecting an Ikelite housing to an Ikelite flash, with TTL mode support.
Included:
- 1 protection cap for Ikelite/Ikelite pin (IKE 0301)
- 1 dose of Ikelite silicone grease 1cc
Additional Information:
The blue ring on one end of the cable indicates TTL mode compatibility.
Do not connect this cable to a flash that is not TTL compatible.
After use, disconnect the cable from the flash, apply a thin layer of grease to the seal, and replace the pin protection cap to prevent the pins from sticking.
This model replaces reference 4103.51 since January 2019.
No customer reviews for the moment.
