Waterproof housing Ikelite for SONY A1 et A7S III

Waterproof Housing DL200 (DRY LOCK) for Sony Alpha 1 and Alpha 7S Mark III

This next-generation housing ensures an excellent grip. The transparent Lexan back door allows easy verification of the proper positioning of the camera body and controls. Its specially formulated gray color reflects solar rays, ensuring better cooling, particularly for devices filming in 4K. Compared to black or transparent housings, this color offers superior contrast for better LCD screen visibility. The levers and buttons allow the use of almost all camera body controls. A waterproof flash port allows the use of an external Ikelite flash (DS51, 125, 160, 161). The sync cable inhibits the internal flash to optimize battery life. TTL use requires a hotshoe converter sold separately. The extra-large zoom control allows precise focal length adjustment. This housing is equipped with a 1/2" vacuum valve (manual pump ref. IKE 47011-00 sold separately) to check the sealing before each dive. It's ideal for diving, surfing, and pool use.

Included with:

• Waterproof housing
• Rear O-ring (IKE 0132-59) (installed)
• Front O-ring (IKE 0132-45) (installed)
• Zoom gear retention device (IKE 75900) (installed)
• Port hole cover (IKE 0200-92) (installed)
• Waterproof cable port sealing cap (IKE 9104-7) (installed)
• Left handle plate (IKE 4077-67) (installed)
• Camera mount for Sony A7S III (IKE 95415)
• Camera mount for Sony A1 (IKE 95419)
• Tool for zoom gear retention device (IKE 0945-06)
• 0.050-inch hex key (IKE 0945-11)
• Silicone lubricant tube 1 cc

Note: This housing is delivered without a port. The port is essential to ensure sealing and must be ordered separately according to the type of lens used. Please contact us for personalized advice.

Accessible controls:

This housing allows access to essential camera controls for underwater shooting, except:

• Diopter correction dial for the viewfinder
• Rear dial (functions accessible via the front dial)
• Joystick movements (up, down, left, right - the joystick button can be pressed)

Compatible ports and domes:

The DL "DRY LOCK" port system allows the use of most lenses.

Compatible accessories:

A selection of accessories and spare parts for this housing is available in the "Accessories" tab of this product page. Feel free to contact us for compatibility advice with your existing equipment.

Compatible external flashes:

The use of an external flash is recommended to enhance color and exposure. The fiber optic triggering system is not compatible with this housing.

To enable TTL functionality with Ikelite flashes, a Sony ST1 TTL electronic converter (ref. IKE 46042) must be purchased separately.

Recommended flashes:

• Flash DS51 II (TTL with ST1 46042 converter and Manual)
• Flash DS160 II (TTL with ST1 46042 converter and Manual)
• Flash DS230 (TTL with ST1 46042 converter and Manual)

Compatible lighting:

We also offer photo and video lighting solutions suitable for this housing. Contact us for personalized advice.