Waterproof housing Ikelite for SONY A7II, A7RII et A7SII

DL200 Waterproof Housing (DRY LOCK) for Sony Alpha 7-II, Sony Alpha 7R-II, and Sony Alpha A7S-II

The DL200 housing of the new generation provides an optimal grip. Its transparent Lexan back door allows you to verify the proper positioning of the camera body and control levers inside. Its specially formulated gray color helps dissipate heat, especially for cameras shooting in 4K, while providing superior contrast for better viewing of the LCD screen. The housing's levers and buttons give access to almost all the camera body controls.

A flash port, via a waterproof connector, is provided for using external Ikelite flashes such as the DS51, 125, 160, and 161 models. The sync cable disables the camera's internal flash, thus prolonging battery life. A TTL hotshoe converter, sold separately, is required to use TTL.

The housing is equipped with an extra-large, flexible zoom control for fine focal adjustments. It also includes a 1/2" vacuum valve to test the watertightness before each dive (manual pump ref. (IKE 47011) sold separately). This housing is ideal for diving, surfing, and pool use.

Included with:

• Housing
• Rear O-ring (IKE 0132-59) (installed)
• Front O-ring (IKE 0132-45) (installed)
• Zoom pinion fixer (IKE 75900) (installed)
• Port hole cover (IKE 0200-92) (installed)
• Waterproof connector cap (IKE 9104-7) (installed)
• Base with left-hand quick release handle (IKE 4077-67) (installed)
• Tool for zoom pinion fixer (IKE 0945-06)
• 0.050 inch hex key (IKE 0945-11)
• 1/16 inch hex key (IKE 0945-16)
• 1 cc silicone lubricant tube

Important: This housing is delivered without a port. The port, essential for watertightness, must be purchased separately based on the lens used. We recommend consulting us to choose the compatible port.

Accessible controls:

This housing provides access to the camera's essential controls, except for:

• Viewfinder diopter adjustment wheel
• AF/MF/AEL control
• Rear dial

Compatible ports and domes:

This housing is compatible with most lenses thanks to its DL "DRY LOCK" port system.

Compatible accessories:

A range of accessories and spare parts is available in the "accessories" tab of this product page. Feel free to contact us for advice on compatibility with your existing equipment.

Compatible external flashes:

Using an external flash is strongly recommended to improve color rendering and subject exposure. Using a fiber-optic triggered flash is not compatible with this housing.

To use TTL with Ikelite flashes, a TTL DL2 Sony ST1 converter (ref. (IKE 46042)) must be purchased separately.

Recommended flashes:

• DS51 II Flash (TTL with DL2 converter + ST1 connector (IKE 46042) and Manual)
• DS160 II Flash (TTL with DL2 converter + ST1 connector (IKE 46042) and Manual)
• DS230 Flash (TTL with DL2 converter + ST1 connector (IKE 46042) and Manual)

Compatible lighting:

We also offer a selection of photo and video lights compatible with this housing. Feel free to contact us for personalized advice.