Waterproof housing Ikelite for NIKON Z6 III

DL200 Waterproof Housing (DRY LOCK) for Nikon Z6 III

The new-generation DL200 housing offers optimized ergonomics and excellent handling. Its transparent Lexan rear door allows you to check the correct positioning of the camera and control levers. Its specially formulated gray color reflects sunlight, reducing overheating, especially when recording in 4K. Unlike black or transparent housings, this color enhances contrast for better visibility of the LCD screen.

The levers and buttons provide access to most camera controls. A waterproof flash connector allows the use of external Ikelite flashes (DS51, 125, 160, 161). Wired synchronization disables the internal flash, increasing battery life. TTL usage requires a converter and a TTL hotshoe (sold separately). The extra-large zoom control ensures precise focal length adjustment.

The housing comes equipped with a 1/2" vacuum valve, allowing a waterproof test before each dive (manual pump sold separately). It is ideal for diving, water sports (surfing, swimming pool, etc.), and underwater photography.

Box contents:

• DL200 Housing
• Pre-installed O-rings: rear (IKE 0132-59), front (IKE 0132-45)
• Zoom holder (IKE 75900) (installed)
• Port cover (IKE 0200-92) (installed)
• Waterproof connector cap (IKE 9104-7) (installed)
• Base with quick-release left handle (IKE 4077-67) (installed)
• Zoom holder tool (IKE 0945-06)
• Hex keys: 0.050" (IKE 0945-11) and 1/16" (IKE 0945-16)
• 1 cc silicone lubricant tube

Warning: The port is not included. It is essential to ensure waterproofing and must be selected according to the lens used. Contact us for personalized advice.

Accessible controls:

The housing provides access to key controls, except for:

• Viewfinder diopter adjustment knob
• Joystick (up, down, left, right)
• DOF button (Depth of Field)
• fn1 button
• fn2 button

Compatible ports and domes:

This housing is designed to work with most lenses via the DL "DRY LOCK" system.

Compatible accessories:

A selection of accessories and spare parts is available in the Accessories tab of this product page.

Need advice? Contact us to check compatibility with your equipment.

Compatible external flashes:

An external flash is recommended to enhance color rendering and subject exposure. Fiber optic synchronization is not possible with this housing.

To use TTL with Ikelite flashes, a NIKON TTL converter (IKE 46056) is required (sold separately).

Recommended flashes:

• DS51 II (TTL with NIKON converter (IKE 46056) and manual)
• DS160 II (TTL with NIKON converter (IKE 46056) and manual)
• DS230 (TTL with NIKON converter (IKE 46056) and manual)
• Sea & Sea YS-D3 Duo (manual mode only)

Compatible lighting:

Photo and video lighting solutions are available. Contact us for recommendations tailored to your needs.