Waterproof housing Ikelite for SONY A7C II et A7CR

Waterproof Housing Ikelite DL/200 to 60 meters for SONY A7C II and A7CR camera

This next-generation housing offers an optimal grip. Its transparent polycarbonate back door allows easy verification of the camera's positioning and controls. The special grey color reflects sunlight to better cool the camera, especially models recording in 4K. Compared to black or transparent housings, this housing offers better contrast for clearer LCD screen viewing.

The controls are designed to allow the use of almost all the original camera buttons. A dedicated electronic circuit transmits TTL information for an external flash, automatically adjusting the flash power based on ambient light. A plug allows you to optionally add a flash port and TTL converter to use an Ikelite TTL external flash (DS51, 125, 160, 161). The cable sync connection disables the internal flash to improve battery life. Using one or two flashes via fiber optics is also possible.

Included with :

• Housing
• Rear O-ring (IKE 0132-59) (installed)
• Front O-ring (IKE 0132-45) (installed)
• Zoom gear (IKE 75900) (installed)
• Port hole cover (IKE 0200-92) (installed)
• Waterproof cap for hull pass-through (IKE 9104-7) (installed)
• Left side plate (IKE 4077-67) (installed)
• Zoom gear tool (IKE 0945-06)
• 0.050-inch hex key (IKE 0945-11)
• 1cc silicone lubricant tube

Attention : This housing is shipped without a port! The port is essential for ensuring waterproofing and must be purchased separately based on your lens type. We recommend contacting us for personalized recommendations.

Accessible controls :

All major camera controls are accessible, except for the diopter adjustment dial.

Compatible accessories :

A selection of accessories and spare parts is available in the "Accessories" tab of this product page. Please feel free to consult us for compatibility advice with your equipment.

Compatible external flashes :

Using an external flash is recommended to improve color quality and exposure of the subjects. Using a flash with fiber optic triggering is not compatible with this housing.

To activate the TTL function of Ikelite flashes, the TTL converter (IKE 46042) must be purchased separately.

Recommended flashes :

• Flash DS51 II (TTL with ST1 46042 converter and Manual)
• Flash DS160 II (TTL with ST1 46042 converter and Manual)
• Flash DS230 (TTL with ST1 46042 converter and Manual)
• Sea & Sea YS-D3 Duo (manual mode only)

Compatible lighting :

We offer photo and video lighting. Contact us for personalized advice.