Waterproof housing Ikelite for SONY A7 Mark IV et A7R Mark V

Waterproof Housing DL200 (DRY LOCK) for Sony Alpha 7 IV and Alpha A7R V Digital Camera

This next-generation housing offers an optimal grip. The transparent Lexan rear door allows easy verification of the camera and controls placement inside the housing. Its gray color reflects sunlight, optimizing the cooling of the device, especially for models filming in 4K. Compared to black or transparent housings, this shade provides improved contrast for better LCD screen visibility. The levers and buttons allow the use of almost all the original camera controls. A waterproof flash port enables the use of Ikelite external flashes (DS51, 125, 160, 161). The sync cable disables the internal flash, saving camera power. TTL requires a hotshoe TTL converter, sold separately. An extra-large zoom control allows precise focal length adjustments. This housing comes equipped with a 1/2" vacuum valve to check the sealing before each dive (manual pump ref. IKE 47011, sold separately). Ideal for diving, surfing, and pool use. Standard M16 port for accessories, with the option of adding an M24 port for an external HDMI monitor (visible in the photo, but not installed by default). Please contact us for further details.

Included with:

• Housing
• Rear o-ring (IKE 0132-59) (installed)
• Front o-ring (IKE 0132-45) (installed)
• Zoom gear retention device (IKE 75900) (installed)
• Port hole cover (IKE 0200-92) (installed)
• Waterproof cable pass-through cap (IKE 9104-7) (installed)
• Left-side plate with handle (IKE 4077-67) (installed)
• Tool for zoom gear retention device (IKE 0945-06)
• 0.050 inch hex key (IKE 0945-11)
• 1 cc tube of silicone lubricant

Warning: This housing is delivered without a port! The port is essential for ensuring the waterproofing and must be ordered separately based on the lens type used. Contact us for personalized advice on this topic.

Accessible controls:

This housing allows access to the main camera controls for underwater photography, with the following exceptions:

• Viewfinder diopter correction dial
• Rear wheel (functions of this wheel can be accessed via the front wheel)
• Joystick movements (up, down, left, right; the joystick button can be pressed)

Compatible ports and domes:

The DL "DRY LOCK" port system allows the use of most lenses.

Compatible accessories:

A selection of accessories and spare parts for this housing is available in the "Accessories" tab of this product page. Feel free to contact us for advice on compatibility with your existing equipment.

Compatible external flashes:

We recommend using an external flash to improve color and exposure quality. Using a fiber-optic triggered flash is not compatible with this housing.

To activate the TTL function with Ikelite flashes, a Sony ST1 TTL converter (ref. IKE 46042) must be purchased separately.

Recommended flashes:

• Flash DS51 II (TTL with ST1 46042 converter and Manual)
• Flash DS160 II (TTL with ST1 46042 converter and Manual)
• Flash DS230 (TTL with ST1 46042 converter and Manual)

Compatible lighting:

We also offer photo and video lighting solutions adapted for this housing. Please contact us for personalized advice.